By Michael J. Devereux II, CPA, CMP
The Tax Cuts and Jobs Act of 2017 (tax reform) ushered in a host of new tax laws and incentives, and every mold builder has now filed at least one tax return under the new tax regime. Many found new ways to defer or permanently reduce their tax bills, whether that be from enhanced expensing, larger tax credits or deferral of revenue to the 2019 tax year.
The 2019 tax return filing season is right around the corner. As such, December is a time for year-end tax planning, whereby mold builders will make significant decisions that impact the amount of tax they ultimately pay for the 2019 tax year. Tax planning can mean several things. Sometimes, companies can recognize permanent tax savings by utilizing tax incentives, such as the R&D tax credit, the Interest Charge – Domestic International Sales Corporation (IC-DISC), or the work opportunity tax credit. Other times, tax planning is all about accelerating tax deductions and deferring the recognition of revenue. For many, it’s typically a combination of both.
Moreover, tax planning is not done in a vacuum. Taxpayers must look at the current tax year, as well as future tax years, as some of the decisions a company considers include whether to accelerate or defer income from 2019 to 2020, or vice versa. So, when companies are reviewing tax-planning options, they should analyze two-year projections to ensure they understand what is being gained or missed. The following is meant to provide mold builders with some ideas and tips as they embark on year-end tax planning.
Tax Reform improved two popular deductions that allow for accelerated depreciation – §179 and bonus depreciation. The §179 deduction limit was increased to $1 million for 2018, and after being indexed for inflation, is $1,020,000 for the 2019 tax year. Moreover, additional assets were added to the definition of §179 property, including HVAC and security systems; and the §179 phase-out threshold now begins at $2,550,000 of eligible assets placed in service for tax year 2019.
Tax Reform also increased the bonus depreciation percentage to 100%, retroactively, for property placed in service after September 27, 2017, through December 31, 2022. Beginning in 2023, the bonus depreciation percentage is phased down by 20% each year, with the accelerated “bonus” depreciation phased out by 2027.
These changes will, inevitably, make cost segregations more valuable. A cost segregation allows taxpayers to analyze their plants and equipment to segregate the cost of real property – which is, generally, depreciable over a 39-year life – from personal property – which is likely to have shorter depreciable life and qualify for one of the immediate expensing provisions. Taxpayers can “catch up” missed depreciation deductions.
R&D tax credit
The R&D tax credit is the tax incentive likely to have the biggest impact in reducing a mold builder’s tax liability.
The R&D tax credit rewards innovation. Tool builders that are designing and developing new tools or improving their processes may be engaging in activities that are eligible for the R&D tax credit.
While Internal Revenue Code (IRC) §41 (the code section governing the R&D tax credit) was not changed, the R&D tax credit’s value increased by 21.5% when Tax Reform reduced the top corporate tax rate.
For tool builders making the proper §280C election on an originally filed return (including extensions), the value of the credit was increased significantly. The §280C election percentage is equal to 100% minus the top corporate tax rate. When Tax Reform lowered the top corporate tax rate from 35% to 21%, the applicable percentage found in §280C went from 65% to 79%. As a result, credits will be greater with the same level of research expenditures.
Other credits and incentives
In addition to the R&D tax credit, many other tax incentives are available. For instance, mold builders that regularly export their tools may find benefit with an IC-DISC, a way of reducing the federal tax liability related to the profits made on export sales. In addition, those industry members hiring within specified targeted groups, such as food stamp recipients and qualified veterans, can qualify for the Work Opportunity Tax Credit (WOTC).
Methods of accounting
Tax Reform expanded upon the accounting methods available to small- and medium-size taxpayers. Mold builders with average annual gross receipts of less than $25 million over the prior three years may adopt a number of accounting methods that were not previously available to them. Those with less than $25 million of average gross receipts from the prior three years may change to the cash method of accounting, be exempt from the requirement to account for inventories, and exempt from the Uniform Capitalization (UNICAP) rules for tax years beginning after December 31, 2017. Each requires a separate accounting method change and some planning to ensure the change in method of accounting is done properly.
IRC §199A flow-through deduction
The Qualified Business Income Deduction in IRC §199A, which was enacted as part of Tax Reform, allows a 20% deduction of Qualified Business Income to all noncorporate taxpayers (i.e., flow-through entities, such as S Corporations, Partnerships and LLCs).
Proper planning is important to be sure that tool builders and their owners take full advantage of the new law. For instance, many tool builders own their buildings in a separate entity and rent the plant to the operating business. Real estate entities may qualify for the deduction, but only if they are operating like a trade or business. That means no triple net leases, separate checking accounts, etc. Companies not operating like a trade or business may be considered an investment and, therefore, not eligible for the new deduction.
While the aforementioned ideas are likely to be the most impactful for mold builders, companies should evaluate what incentives, methods and structure are best for them, given their goals and fact patterns.
Michael J. Devereux II, CPA, CMP, is a partner and director of Manufacturing, Distribution & Plastics Industry Services for Mueller Prost. Devereux’s primary focus is on tax incentives and succession planning for the manufacturing sector. He is a member of the AMBA board of directors and regularly speaks at manufacturing conferences around the country on tax issues facing the manufacturing sector. For more information, visit www.muellerprost.com.